Your Exclusive Dealer for Panga Marine Fishing Boats
In Maryland, Delaware and Virginia's Eastern Shore.
Panga Marine leads the way as the first and foremost builder of Panga style fishing boats in the U.S. They've taken the legendary, original Panga design and transformed it into a line of sophisticated fishing boats tailored to American anglers. And most models are totally customizable. |
| |
18' PANGA SKIFF
A rugged skiff to hunt the shallows that won't come close to sinking your bank account or fuel budget. What it will do is zip along the bays and ghost over the shallows, providing you great pleasure for inshore fishing or exploring. And if you want to take them offshore, their high bow and reverse chine make for an amazingly dry ride with great maneuverability
With the success of the original skiff, the 2010 version comes with a molded, fully-lined interior and deck. It features 3 console options—a mini side or center console, and a full standup midships center console.
Additional modular options include 5 seating choices, from bench seats to leaning posts, 2 live wells, and a stern casting platform.
Specs
Length: 18'
Draft: 6"
Maximum HP: 75
Hull Weight: 625 lbs.
Performance
 Approx. 10 MPG with a 25 HP, top speed 25 MPH
Approx. 9 MPG with a 40 hp, top speed 38 MPH |
 
|
Click for Standard Features
Structural
Molded, fully-lined interior and deck
No wood
100% composite construction
Highest quality workmanship
10 year structural hull warranty (transferable)
Hardware
Orcas 316 stainless hardware used throughout.
Stainless bow and stern eyes
Stainless cleats (4)
Black rub rail
|
|
18’ Niente
The Niente is as rugged as they come and will take you anywhere in safety and comfort. Featuring a rolled gunnel interior with a forward casting deck, the Niente is perfect as a shallow draft, easy to pole boat.
Specs
Length: 20' 1”
Beam: 6' 6"
Draft: 6"
 Maximum HP: 115
Hull Weight: 950 lbs.
|
|
Click for Standard Features
Center console
Insulated bench seat w/4 rod holders
Casting platform
Anchor & bow storage lockers
Standard navigation light package
Two tone hull
S/S cleats, bow and stern eyes
Wide rear seat w/storage for gas tank
29 gallon under floor fuel tank
750 GPH bilge pump
Uniflex no feedback steering with Schmidt wheel
Black rub rail
S/S fold-up cleats
10 year structural hull warranty (transferable)
|
|
20’ Super Skiff
From its basic configuration to the fully rigged version, here’s a go anywhere skiff that’s totally seaworthy, unsinkable and easy handling. Perfect for fishing the flats, working the bays, or exploring the back country and beaches. And if you want to take it offshore, its wave busting high bow and reverse chine will keep you dry and give you amazing maneuverability.
Specs
Length: 20' 1”
Beam: 6' 6"
Draft: 6"
 Max. HP: 115 HP
Hull Weight: 950 lbs.
|
 |
Click for Standard Features
Center console
Insulated bench seat w/4 rod holders
Casting platform
Anchor & bow storage lockers
Standard navigation light package
Two tone hull
S/S cleats, bow and stern eyes
Wide rear seat w/storage for gas tank
10 year structural hull warranty (transferable)
29 gallon under floor fuel tank
750 GPH bilge pump
Uniflex no feedback steering with Schmidt wheel
Black rub rail
S/S fold-up cleats
|
|
22’ Marquesas
Totally customizable.The Marquesas is solid as a rock in all conditions. Hand laid, knitted fiberglass fabric is used throughout. We foam fill underneath the floor, fiberglassing the foam so it cannot absorb water. The result is an absolutely unsinkable boat.
Specs
Lenght: 22’10”
Beam: 7'
Draft: 8"
 Transom Height: 27"
Max. HP: 150
Hull Weight: 1,650 lbs.
|
 |
Click for Standard Features
Structural
Highest quality workmanship
Insulated bench seat w/4 rod holders
Unsinkable close celled foam filled hull.
100% composite construction (No wood)
Center console
10” walk-around gunnels.
Forward casting platform
Mechanical steering
Heavy duty rub rail.
10 year structural hull warranty (transferable)
100% Hand laid using biaxial knitted material throughout.
Nida-core decks for superior strength and mounting ability.
Nonskid surfaces on decks and cockpit sole.
High density composite transom integrated in hull through stringer system with unique external knees.
Close cell foam under decks providing positive flotation encapsulated in fiberglass to prevent absorption.
Two tone color
Electrical
Shark-eye navigation lighting.
Heat-shrink sealed wire connections throughout.
Every wire is marked and labeled for its use.
Hand wired and meticulously organized under console.
Storage
Storage compartments and anchor locker
Fuel System
Moeller 49 gallon poly tank (under deck)
Flush custom hull side fuel vent with water trap
Racor fuel filter with clear well and easy release plug
Stainless with white face fuel gauge - matches engine selection
Fire resistant fuel hose |
Hardware
Lenco trim tabs
Hydraulic steering
Ritchie compass
Orcas 316 stainless hardware used throughout
Flush hatch latches.
All hardware flush mounted including hinges
5 stainless pull-up cleats
Schmidt stainless 3 spoke steering wheel with knob.
4 stainless steel rod holders in gunnel
Stainless removable garboard boat drain in transom
Orcas welded plate bow and transom eyes for superior strength
Plumbing
Self bailing cockpit with 2 transom scuppers.
Double clamped hoses with stainless.
750 GPH automatic bilge pump & float switch |
|
|
22’Boca Grande
The Boca Grande's one piece inner liners are taken from and conform to the shape of each hull, assuring a quieter stronger boat. Its unique planing surface gives the boat incredible stability, high performance and remarkable fuel efficiency.
Check out the integrated casting platform with 3 large storage lockers beneath, the extra roomy console ready for electronics, and the 10" walk-around gunnel. The Boca Grande will accommodate your every need—versatility personified.
Specs
Lenght: 22’10”
Beam: 7'
Draft: 8"
 Transom Height: 27"
Max. HP: 150
Hull Weight: 1,650 lbs.
|
 |
Click for Standard Features
Structural
Highest quality workmanship
Full interior liner molded to fit each hull
Insulated bench seat w/4 rod holders
Unsinkable close celled foam filled hull.
100% composite construction (No wood)
Center console
10” walk-around gunnels.
Forward casting platform
Mechanical steering
Heavy duty rub rail.
10 year structural hull warranty (transferable)
High density composite transom integrated in hull through stringer system with unique external knees.
Close cell foam under decks providing positive flotation encapsulated in fiberglass to prevent absorption
100% Hand laid using biaxial knitted material throughout
Nida-core decks for superior strength and mounting ability
Nonskid surfaces on decks and cockpit sole
Two tone color
Electrical
Shark-eye navigation lighting
Heat-shrink sealed wire connections throughout.
Every wire is marked and labeled for its use.
Hand wired and meticulously organized under console.
Storage
Storage compartments and anchor locker
Fuel System
Moeller 49 gallon poly tank (under deck)
Flush custom hull side fuel vent with water trap
Racor fuel filter with clear well and easy release plug
Stainless with white face fuel gauge - matches engine selection
Fire resistant fuel hose |
Hardware
Lenco trim tabs
Hydraulic steering
Ritchie compass
Orcas 316 stainless hardware used throughout
Flush hatch latches.
All hardware flush mounted including hinges
5 stainless pull-up cleats
Schmidt stainless 3 spoke steering wheel with knob.
4 stainless steel rod holders in gunnel
Stainless removable garboard boat drain in transom
Orcas welded plate bow and transom eyes for superior strength
Plumbing
Self bailing cockpit with 2 transom scuppers
Double clamped hoses with stainless clamps
750 GPH automatic bilge pump & float switch |
|
|
Yucatan 27
This is a custom built rather than a production boat. While ready to fish, the Yucatan 27 is totally capable of being used as a research, dive, law enforcement, medical or other special interest vessel. Built to the highest specifications, the 27 is offshore ready but also flats friendly. Its hull construction incorporates an outer and inner layer of knitted materials around a core of half inch Divinycell, one of the lightest and strongest of synthetic materials. Hand-laid, multi-directional and multi-layered, knitted fiberglass fabric is used throughout.
Specs
Length: 27’1”
Beam: 8’
Draft: 14” at rest
Hull Weight: 3,800 lbs.
Deadrise: 22 degrees
 Fuel Capacity: 220 gallons
Engines(s): Single or Twin Installation
Max HP: 2 x 250
Recommended HP: 2 x 175
|
|
Click for Standard Features
Structural
Made of 100% highest quality composite materials
No wood used in construction.
Fully customizable hand finished interior.
Integrated stringer system
Custom Awlgrip nonskid deck
Cored hull for rigidity and strength
Highest quality gelcoat
Two-tone hull color (you choose color)
Exclusive concave running surface
10-year transferable hull warranty
Heavy duty stainless steel rub rail
100% hand laid using multiple layers of knitted material
Cored decks for superior strength and mounting T-Tops & towers
Transom consists of multiple layers of high density composite material for superior strength.
Deck to hull joint of space age material (Plexus) for inseparable bonding
Storage
Tackle locker in transom
Large, insulated, in-deck fish box with macerator pump.
Lockable console door.
Closed cell foam insulation for fish box and console seat
Extra large anchor locker with more than ample storage
Hardware
Orcas Marine hardware used throughout.
All hardware flush mounted.
Double pin hinges.
2 flush mounted stern cleats.
2 flush mounted spring cleats.
2 flush mounted bow cleats.
15-inch steering wheel with knob
Stainless drain plug in transom
9/16" bow eye with stainless steel backing plate and matching transom D-rings
Electrical
Under gunnel LED Lighting
Pacer electrical switch panel
Circuit breakers for each switch
12 volt DC plug in panel
Shark-eye navigation lighting in hull
Heat shrink sealed wire connectors throughout.
All wires and circuits marked and labeled for their use.
Guest dual battery switch
Dual standard Interstate batteries
Wiring meets or exceeds ABYC standards. |
Operational
Uflex hydraulic steering system
Lenco trim tabs.
Armstrong bracke.
2 live wells, 18 gallon each, LED lighted.
Custom Console with large space for flush mounting electronics (head and shower optional)
Integrated seat forward of console with seat and backrest cushion, insulated for use as cooler.
Custom built aluminum leaning post with 4 rocket launchers
Cup holders in the standard console
Flush mounted, lighted compass with 5” card
Fuel System
200 gallon, custom built aluminum fuel tank, primed, coated and totally encapsulated to prevent corrosion.
Sierra 10-micron fuel filter
Instruments appropriate to engine.
Plumbing
True self bailing hull
Stainless steel deck drains with ball scupper system preventing backwash when backing down hard
All hoses double clamped with premium stainless hardware
Rule 1500 GPH automatic bilge pump.
Rule 1100 GPH baitwell pump
High speed bait pump intake with sea-cock
In-line bait pump filter |
|
|
28’ Aventura
Custom built for long range adventure and special usage. Aside from its prowess as a pleasure fishing boat, Panga Marine's Aventura is highly capable of being used as a research, dive, law enforcement, and other special interest vessel. It's a high performance, fuel saving, rugged boat that will pamper you offshore and respond like a sports car.
Specs
Length: 28’2”
LOA: 30’9”
Beam: 8’7"
Draft: 15”
Transom Ht.: 48", 36" above waterline
Fuel Capacity: 240 gallons
Hull Weight: 4,700 lbs.
Deadrise: 22 degrees
Maximum HP: 2 x 250
Gunnel Ht.: 28" Min.
Gunnel Width: 10"
|
|
Click for Standard Features
Structural
Made of 100% highest quality composite materials
No wood used in construction.
Fully customizable hand finished interior.
Integrated stringer system
Custom Awlgrip nonskid deck
Cored hull for rigidity and strength
Heavy duty stainless steel rub rail
Highest quality gelcoat
Two-tone hull color (you choose color)
Transom consists of multiple layers of high density composite material for superior strength.
100% hand laid using multiple layers of knitted material
Cored decks for superior strength and mounting T-Tops & towers
Deck to hull joint of space age material (Plexus) for inseparable bonding
Exclusive concave running surface
10-year transferable hull warranty
Storage
Tackle locker in transom
Large, insulated, in-deck fish box with macerator pump.
Lockable console door.
Closed cell foam insulation for fish box and console seat
Extra large anchor locker with more than ample storage
Hardware
Orcas Marine hardware used throughout.
All hardware flush mounted.
Double pin hinges.
2 flush mounted stern cleats.
2 flush mounted spring cleats.
2 flush mounted bow cleats.
15-inch steering wheel with knob
Stainless drain plug in transom
9/16" bow eye with stainless steel backing plate and matching transom D-rings
Electrical
Under gunnel LED Lighting
Pacer electrical switch panel
Circuit breakers for each switch
12 volt DC plug in panel
Shark-eye navigation lighting in hull
Heat shrink sealed wire connectors throughout.
All wires and circuits marked and labeled for their use.
Guest dual battery switch
Dual standard Interstate batteries
Wiring meets or exceeds ABYC standards.
|
Operational
Uflex hydraulic steering system
Lenco trim tabs.
Armstrong bracke.
2 live wells, 18 gallon each, LED lighted.
Custom Console with large space for flush mounting electronics (head and shower optional)
Integrated seat forward of console with seat and backrest cushion, insulated for use as cooler.
Custom built aluminum leaning post with 4 rocket launchers
Cup holders in the standard console
Flush mounted, lighted compass with 5” card
FUEL SYSTEM
200 gallon, custom built aluminum fuel tank, primed, coated and totally encapsulated to prevent corrosion.
Sierra 10-micron fuel filter
Instruments appropriate to engine.
Plumbing
True self bailing hull
Stainless steel deck drains with ball scupper system preventing backwash when backing down hard
All hoses double clamped with premium stainless hardware
Rule 1500 GPH automatic bilge pump.
Rule 1100 GPH baitwell pump
High speed bait pump intake with sea-cock
In-line bait pump filter |
|
|
| |
| |
|
|
